Can a Dewalt 20V impact driver remove lug nuts?
Can a Dewalt 20V impact driver remove lug nuts? It could if I'm using it. Well, it depends: If the nut isn't overtightened, if the nut isn't rusted on, if the nut isn't stripped, if the nut isn't cross-threaded.
An impact DRIVER with a 1/4" hex chuck is typically used for fastening smaller screws and bolts and similar. Further, a smaller impact WRENCH (3/8" square drive or smaller 1/2" square drive model) may not have the torque or power necessary to remove lug nuts from a vehicle.
A 1/2-inch impact wrench is essential for any heavy-duty automotive work. We tested a bunch of the most popular brands on the market; here are the ones to buy. A tool's value lies in its ability to ease demanding tasks. Among power tools, the impact wrench stands out for removing stubborn lug nuts and rusted bolts.
Best for Lug Nuts
Our top pick is the DEWALT 20V Max XR Lithium-Ion Cordless Impact Wrench because it has 700 foot-pounds of maximum fastening torque, 1,200 foot-pounds of nut-busting torque, and a brushless motor that will extend its life. Choose from three speeds—0-400/1,200/1,900 rpm—depending on your needs.
The required torque can vary depending on the vehicle make and model, as specified in the manufacturer's recommendations. Common torque values for lug nuts typically range from 80 ft-lb to 140 ft-lb or more.
Impact drivers are usually smaller (using 1/4" hex drive) for driving in smaller screws. Impact wrenches are larger and deliver more power, and are usually 3/8" square drive and larger. Impact wrenches are usually for loosening and fastening large nuts and bolts.
Can an Impact Driver Remove Lug Nuts? Yes, technically. You would need to use a hex shaft to square drive adapter in order to attach a lug nut socket to the tool. However, an impact driver may not have enough torque to break loose a lug nut that's rusted/frozen or over tightened.
Did you know that impact wrenches shouldn't be used to tighten lug nuts? This may damage or break the nuts, and – in best case scenario – you'll have trouble unscrewing them with a hand wrench.
The Lugdriller® is the Ultimate tool to remove the most difficult locking lug nuts in the quickest and safest way.
Most automotive technicians use an air powered 1/2”or 3/4” impact. Depending on the shop, they may use a battery powered one. If the lug nut or bolt is hard to remove, they may try and use what is called a breaker bar to remove them.
Can a 20v impact driver remove lug nuts?
Impact drivers are of different size. The size appropriate for lug nuts would open these. I've use a 20v DeWalt impact wrenches 1/2 inch drive using impact grade sockets to remove lug nuts and suspension bolts from a 50 year old car. Corroded bolts require adding penetrant before using.
A socket adapter can be used to convert the 1/4″ hex socket to a 1/2″ square drive. This will allow you to transform your impact driver into a wrench. An impact driver may not be strong enough if you have a problem. This is important to remember.
Utilizing a torque wrench is a must so you can be sure you're applying the correct torque for wheel nuts and bolts. While a torque wrench is not necessary for emergency tire changes, eventually you'll want to loosen and re-torque the wheel's nuts or bolts with a torque wrench when you get the opportunity.
1/2 -Inch Torque Wrench
It is the best tool if you are working with lug nuts or anywhere on the vehicle suspension. It is suitable for large bolts and nuts like those in engine mounts. Basically, any tightening task for both transmission and suspension, including motorcycles, would require a 1/2 -inch torque wrench.
1/2" Heavy duty Air Impact Wrench – 880 Nm
The SGS ½“ Heavy Duty Air Impact Wrench is an essential tool for any DIY and professional mechanic. No matter how ambitious your project, it's able to rapidly do the task – helping to remove even the most stubborn and rusty nuts and bolts using its powerful output of 880Nm.
Impact driver torque is usually lower than that of an impact wrench, though 18V and 20V drivers can still reach 167 ft-lbs torque. Impact wrenches, however, can reach more than 1000 ft-lbs, though most users only require 200 ft-lbs.
It depends how tight they are supposed to be. You can't use a torque wrench on lug nuts (also called wing nuts) so it's not likely a precise tightness is required, but if you tighten them so much that they can't be undone by hand then they are over tight.
In most cases, you get more power (torque) from an impact wrench compared to an impact driver. However, some impact drivers in the 18V/20V max class have more power than compact impact wrenches, especially on 12V platforms.
Both electric and air impact wrench are beneficial to change tires or remove lug nuts. You might find them similar, but they have some limitations too. If you give pressure on the lug nuts, it may damage the tires and wheels.
It almost definitely can break them loose and spin them off as long as they were torqued to or near spec or even a fair bit over, but it's not the appropriate tool for it. You should get an impact wrench rather than an impact driver if your primary use case is on lug nuts.
Do I need a special tool to remove lug nuts?
Use a lug wrench to remove lug nuts.
A lug wrench, sometimes called a tire iron, tire tool, or a t-bar, should be provided in your vehicle's tire kit, along with a jack and a spare tire.
Milwaukee M18 FUEL 18-Volt Impact Wrench
Milwaukee is the power tool brand of choice for many pros, who value its exceptional power and rugged design. The M18 Fuel 1/2-Inch impact wrench shows again why that reputation is well-deserved.
Rather than being to drive screws through wood, an impact wrench is more often used to secure or loosen machine nuts or bolts.
Impact drivers can only be used with 1/4″ hex shank accessories, but that doesn't mean all hex shank drill bits are suitable for use with them. For example, you can find many flat drill bits with hex shanks but most of them weren't designed for drilling with impact drivers and doing so may cause them to shatter.
An air impact wrench is a very powerful machine. The torque wrench uses a ball detent and a spring in the head of the wrench that makes a click as soon as the pre-set torque is reached. The use of an air impact wrench will not provide this feedback and the applied torque is indefinite.